%20ATOMIC%20ABSORPTION%20STANDARD%20SOLUTION%20CONTAINS%201000MG/LIT%20AAS%20IN%20HNO3%20ACCORDING%20TO%20NIST%20(87790)&url=https://www.auraiyalabchem.com/product/silver-ag-atomic-absorption-standard-solution-contains-1000mg-lit-aas-in-hno3-according-to-nist-87790/&media=https://www.auraiyalabchem.com/wp-content/uploads/2024/09/01-01-1-3.png){kind=link}
SILVER (Ag) ATOMIC ABSORPTION STANDARD SOLUTIONCONTAINS 1000MG/LIT AAS IN HNO3 ACCORDING TO NIST |
| Article No. | 87790 | Grade | AAS Solution | |
| Synonyms | — | C.I. No. | — | |
| CAS No. | — | Purity | — | |
| Molecular Formula | — | Molecular Weight | — | |
| H.S. Code | 38220090 | Shelf Life | 36 Months | |
| Physical Properties | ||||
| Physical state at 20 °C | Liquid | Colour | Clear colourless | |
| Solubility in water [% weight] | Miscible with water. | Matrix | 0.5Mol/L HNO3 | |
| Specifications Parameters | ||||
| Description | Clear colourless liquid. | |||
| Concentration (Ag) | 990 – 1010 mg/lit | |||
| Note(s): 1) Assay (if applicable) method mentioned.
2) Expiry date: 1 year WARNING Hazard statements: Harmful if swallowed. May be corrosive to metals. Causes severe skin burns and eye damage. Harmful if inhaled. Toxic to aquatic life with long lasting effects. Prevention: Do not breathe dust or mist. Wash hands thoroughly after handling. Wear protective gloves/clothing and eye/face protection. Do not eat, drink or smoke when using this product. Use only outdoors or in a well-ventilated area. Avoid breathing dust/fume/gas/mist/vapours/ spray. Response: IF INHALED: Remove to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or doctor/physician if you feel unwell. Wash contaminated clothing before reuse. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. If on skin or hair: remove/take off immediately all contaminated clothing. Rinse with water/shower. Specific treatment: refer to Label or MSDS. Absorb spillage to prevent material damage.
|
IMDG Code : 8/III
UN No. : 3264 IATA : 8 |
|||
| Disposal: The chemical waste should be collected by specialized disposal company. Add a little at a time (2 to 5 gm) to a large volume of water. After the reaction or solution is complete, allow it to run to normal waste, diluting with large amount of water. Any sand used to cover spillage should be thoroughly washed with water before disposal as normal waste. | ||||
| Hazard Pictogram(s) — GHS05, GHS09 | ||||
Reviews
There are no reviews yet.