Home
Shop
Wishlist0

Banner

ALC SPECIAL OFFER

WRIGHT’S STAINING SOLUTION FOR MICROSCOPY (90760)

125.00225.00

Buy Now Compare
Availability: In Stock
SKU:90760

WRIGHT’S STAINING SOLUTION FOR MICROSCOPY

Article No. 90760 Grade For Microscopy
Synonyms Wright’s eosin methylene blue solution C.I.  No.
CAS No. Purity
Molecular Formula Molecular Weight
H.S. Code 32049000 Shelf Life 36 Months
Physical Properties
Physical state at 20 °C Liquid Colour Dark blue
Solubility Miscible with water. Flammability (solid, gas) Flammable
Specifications               Parameters
Description A dark blue coloured solution.
Weight per ml (at 20°C) About 0.820 g
Suitability for Microscopy To pass the test
Residue on evaporation About 0.25% w/v
 Note(s): Assay (if applicable) method mentioned.

WARNING

Hazard statements: Flammable liquid and vapour. Harmful if swallowed. May cause allergic or asthmatic symptoms or breathing difficulties if inhaled. May cause allergic skin reaction. May be corrosive to metals. Causes severe skin burns and eye damage. Toxic if inhaled. Harmful in contact with skin.

PRECAUTIONARY STATEMENTS :                                                              

Prevention: Use only outdoors or in a well-ventilated area. Avoid breathing dust/fume/gas/mist/vapours/spray. Do not eat, drink or smoke when using this product. Wear protective gloves/clothing.In case of inadequate ventilation wear respiratory protection. Wear protective gloves/clothing and eye/face protection. Ground/bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting/equipment Take precautionary measures against static discharge Use only non-sparking tools. Keep away from heat/sparks/open flame – No smoking.

Response: In case of fire, use alcohol-type foam for extinction. IF INHALED: Remove to fresh air and keep at rest in a position comfortable for breathing. If on skin or hair: remove/take off immediately all contaminated clothing. Rinse with water/shower. If experiencing respiratory symptoms call a POISON CENTER or doctor/physician. Absorb spillage to prevent material damage. If skin irritation or rash occurs, seek medical advice/attention. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. IF INHALED: If breathing is difficult, remove to fresh air and keep at rest in a position comfortable for breathing. IF ON SKIN: Gently wash with plenty of soap and water. Immediately call a POISON CENTER or doctor/physician.

IMDG Code:3(6.1)/II

UN No.       :1230

IATA            :3(6.1)

Disposal: Dissolve the chemical to be disposed, in water and allow it to run to waste, diluting with large quantities of water.
Hazard Pictogram(s):– GHS02, GHS05, GHS06, GHS08
size

125 ml, 250 ml

Reviews

There are no reviews yet.

Be the first to review “WRIGHT’S STAINING SOLUTION FOR MICROSCOPY (90760)”
Review now to get coupon!

Your email address will not be published. Required fields are marked *

Back to Top
Language Translator
Product has been added to your cart